Scaling-laws of Radio Spike Bursts and Their Constraints on New Solar Radio Telescopestwo

Radio observation is one of important methods in solar physics and space science. Sometimes, it is almost the sole approach to observe the physical processes such as the acceleration, emission, and propagation of non-thermal energetic particles, etc. So far, more than 100 solar radio telescopes have been built in the world, including solar radiometers, dynamic spectrometers, and radioheliographs. Some of them have been closed after the fulfillment of their primary scientific objectives, or for their malfunctions, and thus replaced by other advanced instruments. At the same time, based on some new technologies and scientific ideas, various kinds of new and much more complicated solar radio telescopes are being constructed by solar radio astronomers and space scientists, such as the American E-OVSA and the solar radio observing system under the framework of Chinese Meridian Project II, etc. When we plan to develop a new solar radio telescope, it is crucial to design the most suitable technical parameters, e.g., the observing frequency range and bandwidth, temporal resolution, frequency resolution, spatial resolution, polarization degree, and dynamic range. Then, how do we select a rational set of these parameters? The long-term observation and study revealed that a large strong solar radio burst is frequently composed of a series of small bursts with different time scales. Among them, the radio spike burst is the smallest one with the shortest lifetime, the narrowest bandwidth, and the smallest source region. Solar radio spikes are considered to be related to a single magnetic energy release process, and can be regarded as an elementary burst in solar flares. It is a basic requirement for the new solar radio telescope to observe and discriminate these solar radio spike bursts, even though the temporal and spatial scales of radio spike bursts actually vary with the observing frequency. This paper presents the scaling laws of the lifetime and bandwidth of solar radio spike bursts with respect to the observing frequency, which provide some constraints for the new solar radio telescopes, and help us to select the rational telescope parameters. Besides, we propose a spectrum-image combination mode as the best observation mode for the next-generation solar radio telescopes with high temporal, spectral, and spatial resolutions, which may have an important significance for revealing the physical essence of the various non-thermal processes in violent solar eruptions.     

Water uptake of riparian plants in the lower Lhasa River Basin,South Tibetan Plateau using stable water isotopes

Riparian plants can adapt their water uptake strategies based on climatic and hydrological conditions within a river basin. The response of cold-alpine riparian trees to changes in water availability is poorly understood. The Lhasa River is a representative cold-alpine river in South Tibet and an under-studied environment. Therefore, a 96 km section of the lower Lhasa River was selected for a study on the water-use patterns of riparian plants. Plant water, soil water, groundwater and river water were measured at three sites for δ¹⁸O and δ²H values during the warm-wet and cold-dry periods in 2018. Soil profiles differed in isotope values between seasons and with the distance along the river. During the cold-dry period, the upper parts of the soil profiles were significantly affected by evaporation. During the warm-wet period, the soil profile was influenced by precipitation infiltration in the upper reaches of the study area and by various water sources in the lower reaches. Calculations using the IsoSource model indicated that the mature salix and birch trees (Salix cheilophila Schneid. and Betula platyphylla Suk.) accessed water from multiple sources during the cold-dry period, whereas they sourced more than 70% of their requirement from the upper 60–80 cm of the soil profile during the warm-wet period. The model indicated that the immature rose willow tree (Tamarix ramosissima Ledeb) accessed 66% of its water from the surface soil during the cold-dry period, but used the deeper layers during the warm-wet period. The plant type was not the dominant factor driving water uptake patterns in mature plants. Our findings can contribute to strategies for the sustainable development of cold-alpine riparian ecosystems. It is recommended that reducing plantation density and collocating plants with different rooting depths would be conducive to optimal plant growth in this environment.     

An appearance‐preserving simplification method for complex 3D building models

The simplification of 3D building models to effectively reduce model complexity and improve rendering efficiency is an important component of 3D GIS. To reduce the data volume while preserving the model appearance, this article proposes a novel simplification method for complex 3D building models. Texture discontinuities are addressed by developing a new data model that records the mapping relation between the texture coordinates of each vertex and its neighboring triangles. The surface mesh of the building model is then segmented into regions, guided by topology and appearance. Finally, the mesh segmentation information is used to derive an improved error metric that considers both geometric and texture errors, and the texture coordinates are adjusted after each simplification operation. A series of comparative experiments alongside traditional methods demonstrates that our approach achieves a good balance between geometric fidelity and texture preservation, and produces simplified 3D building models with better visual quality.     

PMODTRAN: a parallel implementation based on MODTRAN for massive remote sensing data processing

MODerate resolution atmospheric TRANsmission (MODTRAN) is a commercial remote sensing (RS) software package that has been widely used to simulate radiative transfer of electromagnetic radiation through the Earth's atmosphere and the radiation observed by a remote sensor. However, when very large RS datasets must be processed in simulation applications at a global scale, it is extremely time-consuming to operate MODTRAN on a modern workstation. Under this circumstance, the use of parallel cluster computing to speed up the process becomes vital to this time-consuming task. This paper presents PMODTRAN, an implementation of a parallel task-scheduling algorithm based on MODTRAN. PMODTRAN was able to reduce the processing time of the test cases used here from over 4.4 months on a workstation to less than a week on a local computer cluster. In addition, PMODTRAN can distribute tasks with different levels of granularity and has some extra features, such as dynamic load balancing and parameter checking.     

Effects of low- to high-angle normal faults on sedimentary architectures in the Eocene Wenchang Formation,Enping Sag,Pearl River Mouth Basin,South China Sea

The effects of low- to high-angle (>30°) normal faults on sedimentary architectural units in the Eocene Wenchang Formation, Enping Sag, Pearl River Mouth Basin (PRMB), South China Sea were investigated utilising a high-quality 3D seismic data set and restored paleogeomorphology. It has been shown that sequence stratigraphic units and sedimentary architecture are significantly controlled by the low- to high-angle normal faults. The Wenchang Formation, a second-order sequence, can be subdivided into two para-second-sequences (the Lower and Upper Wenchang sequences, E₂W^L and E₂W^U) and seven third-order sequences (from base to top: SQ1～SQ7). The low-angle fault confined sequence architecture of the Wenchang Formation is mainly characterised by lateral stacking with the ratio of the vertical subsidence (V) to horizontal slip (H) being reduced from 1/2 for E₂W^L to 1/6 for E₂W^U. In contrast, the high-angle fault confined sequence is characterised by vertical stacking with the ratio of V/H close to 1 for sequences SQ1 to SQ7. In the 3D seismic area, the features of sediment-dispersal pattern were interpreted based on an integrated analysis of paleogeomorphology, seismic reflection characteristics, stratal thickness distribution and multiple attribute clustering. The results show that the large-scale fan delta, belt-shape lacustrine deposit and bird-foot braided delta systems mainly developed in the low-angle fault confined sequences, whereas small-scale fan delta, rhombus-shaped lacustrine deposit and lobe-shaped braided delta systems inherited tectono-sedimentary architectures in the high-angle fault confined sequences.     

高建筑对周围建筑雷击保护距离的模拟

在已有先导连接参数化方案的基础上,选取近地面层为研究区域,保持方案中其他基本参量不变,通过改变闪电的空间形态,在同一建筑分布的背景下进行多次闪电模拟。研究多个建筑之间的屏蔽作用以及建筑雷击保护距离与建筑相关特征参数之间的关系,结果表明:高建筑对矮建筑具有屏蔽作用,并存在一个临界保护距离,当高、矮建筑高度分别为190 m和165 m,宽度均为20 m时,建筑之间的距离在12 m以内,矮建筑受高建筑完全保护不遭受雷击;建筑之间的距离超过12 m,矮建筑遭雷击次数明显增多。     

承德市2015年2月20-21日强降雪成因分析

利用常规观测资料、卫星云图和NECP (1?? 1?)逐6h再分析资料,对承德市2015年2月20～21日强降雪过程环流形势和物理量场进行了分析。结果表明：在此次强降雪过程中,中、低层的西风槽、切变线和地面上东移加强的蒙古气旋构成了有利天气形势,在这些系统的共同作用下不断有干冷空气侵入承德地区与低层西南暖湿气流交汇,持续的西南暖湿气流对此次强降雪的形成和维持至关重要。相对湿度、水汽通量、垂直速度、涡度及垂直螺旋度的分布和演变很好的反映出了此次强降雪过程中物理量场特点：相对湿度和水汽通量的分布说明强降雪区上空湿度较大且有充足的水汽供应,水汽通量的增大与降雪的增强相一致,水汽通量大值中心与强降雪有很好对应关系。强降雪区上空伴有较强上升运动;降雪区上空均为正涡度时最有利于上升运动和降雪;降雪区上空垂直螺旋度均为正或呈"上负下正"的垂直结构均有利于降雪,低层正垂直螺旋度对强降雪变化有很好的指示意义。     

Use of an inside buffer method to extract the extent of urban areas from DMSP/OLS nighttime light data in North China

Defense Meteorological Satellite Program (DMSP)/Operational Linescan System (OLS) nighttime imagery provides a valuable data source for mapping urban areas. However, the spatial extents of large cities are often overestimated because of the effect of over-glow from nighttime light if a fixed thresholding technique is used. In the work reported here, an inside buffer method was developed to solve this issue. The method is based on the fact that the area overestimated is proportional to the extent of the lit area if a fixed threshold is used to extract urban areas in a region/county. Using this method, the extents of urban areas in North China were extracted and validated by interpretations from Landsat Thematic Mapper images. The results showed that the lit areas had a significant linear relationship with the urban areas for 120 representative cities in North China in 2000, with an R² value of over 0.95. This demonstrates that the inside buffer method can be used to extract urban areas. The validation results showed that the inside buffer model developed in 2000 can be directly used to extract the extent of urban areas using more recent nighttime light imagery. This is of great value for the timely updating of urban area databases in large regions or countries.     

Two Methods for Predicting Reliability Index and Critical Probabilistic Slip Surface of Soil Slopes

Two methods of reliability analysis of soil slopes are studied, and the representative flow charts of both methods are illustrated. Method 1 can predict the reliability index and the critical probabilistic slip surface directly and it is computational efficient, but it needs the development of new codes for integrating the reliability analysis code and the slope stability code. Method 2 makes the reliability analysis code call the slope stability analysis code directly, and each code can be considered as an intact part. The main result of Method 2 is the reliability index of soil slope. Combined with the proposed method for locating the critical slip surface, Method 2 can also predict the probabilistic slip surface. Although Method 2 needs much more callings of the subprogram of slope stability analysis code, it needs not the developing of new computer program. Thus, Method 2 is easy to use and can be applied to different reliability analysis methods and slope stability analysis methods.